DG407CWI+ Overview

The electrical component comes in 28-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operating temperature extended to 0°C~70°C TA. There are 28 terminations totally. A 16 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. The electrical component body receives 28 pins. The circuits in this analogue multiplexer number 2. Search with DG407 if you are looking for analog multiplexer variants. Analog switches have 100Ohm internal resistance. To find out what the 28 pins do, please refer to the datasheets. In normalcircumstances, users should not exceed 30V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V is the lowest voltage the electrical component should receive. This multiplexer would work with 30μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. When using dual power supplies, you should attach at least 4.5V. 20V operating voltages can be used with this electrical part.

DG407CWI+ Features

16 Channels
30μA Supply Current

DG407CWI+ Applications

There are a lot of Maxim Integrated DG407CWI+ Analog Switches & Multiplexers ICs applications.

• Audio and video routing
• Medical Instrumentation
• Video signal routing
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Cross Connects
• Access Concentrators
• 65 V DACs
• Channelized and Unchannelized DS3 applications
• Microprocessor Controlled Analog Systems
• SDH