MAX338CSE+ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, you'll find this switch device. 8:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around 0°C~70°C TA are extended for operation. The total number of terminations is 16. Due to its 8 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16 series. Circuits number 1 make up this analogue multiplexer. Using the MAX338 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 650Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 20V. The digital multiplexer has a low cost Dual, Single supply. It is recommended that the electrical component receives a voltage of 4.5V. It would be sufficient to run this analogue multiplexer with 1μA current. For this switch, a dual supply voltage is feasible, but it must not exceed 20VA dual power supply should have at least 4.5V voltage attached.

MAX338CSE+ Features

8 Channels
1μA Supply Current

MAX338CSE+ Applications

There are a lot of Maxim Integrated MAX338CSE+ Analog Switches & Multiplexers ICs applications.

• Industrial
• Digital Cross-Connects
• Audio and video signal routing
• Microwave transmission systems
• ATM
• Central office
• SDH/SONET multiplexers
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• DSUs
• Avionics and Military Systems