MAX353CPE+ Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Through Hole. 1:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around 0°C~70°C TA are extended for operation. Total terminations are 16. A electrical component with 1 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. This electrical component is included in the 16 series of products. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. It consists of 4 circuits. Try searching with MAX353 if you're looking for variants. The internal resistance of this digital multiplexer is 35Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. A voltage higher than 30V should not normally be supplied to the switches. 10V is the lowest voltage that should be fed to the electronic electronic part. There is no problem with using dual supply voltage, but it should not exceed 20V. If you are using dual power supplies, you should attach at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.

MAX353CPE+ Features

1 Channels
Switch Circuit: SPST - NO/NC

MAX353CPE+ Applications

There are a lot of Maxim Integrated MAX353CPE+ Analog Switches & Multiplexers ICs applications.

• Battery Powered Instruments
• SONET
• High reliability control systems
• Remote wireless modules
• Industrial and process control systems
• Precision test equipment
• Data Acquisition Systems
• Digital Cross-Connects
• Sample hold systems
• Fiber to the Home