MAX4052AEEE+ Overview

Packed in 16-SSOP (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. Unlike digital switches, these are based on SP4T switching circuits. There are 2 circuits in this multiplexer. Try searching for MAX4052 variants of the analog switch ic. As far as internal resistance is concerned, it has 100Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 16V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1μA. Despite this switch's dual supply capability, its voltage should not exceed 8V. In the case of dual power supplies, you should connect at least 2.7V. 15V operating voltages can be used with this electrical part.

MAX4052AEEE+ Features

4 Channels
Switch Circuit: SP4T
1μA Supply Current

MAX4052AEEE+ Applications

There are a lot of Maxim Integrated MAX4052AEEE+ Analog Switches & Multiplexers ICs applications.

• Fiber to the Home
• PCMCIA cards
• Mechanical reed relay replacement
• RGB switches
• New designs requiring multiplexer functions
• Medical
• Communication systems
• Cell phones
• Digital cross connects (DSX-1)
• Automotive applications