125ns, 80ns SPST - NO 25Ohm Analog Switches MAX4712 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)
SOT-23
MAX4712CUE+T Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-TSSOP (0.173, 4.40mm Width)
Number of Pins
16
Operating Temperature
0°C~70°C TA
Packaging
Tape & Reel (TR)
Published
2004
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
ECCN Code
EAR99
Resistance
25Ohm
Terminal Finish
Matte Tin (Sn)
Additional Feature
CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V
Max Power Dissipation
457mW
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
5V
Terminal Pitch
0.65mm
Base Part Number
MAX4712
Pin Count
16
Operating Supply Voltage
5.5V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
11V
Min Supply Voltage
2.7V
Nominal Supply Current
75μA
Max Supply Current
65μA
Throw Configuration
SPST
Turn On Delay Time
175 ns
Voltage - Supply, Single/Dual (±)
2.7V~11V ±2.7V~5.5V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-5V
Turn-Off Delay Time
500 ns
Max Dual Supply Voltage
5.5V
On-State Resistance (Max)
25Ohm
Min Dual Supply Voltage
2.7V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
59 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
8pF 8pF
On-state Resistance Match-Nom
0.2Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
125ns, 80ns
Charge Injection
25pC
Channel-to-Channel Matching (ΔRon)
200m Ω
Crosstalk
-87dB @ 1MHz
Switch-on Time-Max
125ns
Switch-off Time-Max
80ns
Height Seated (Max)
1.1mm
Length
5mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
2,500
$4.37500
$8.75
MAX4712CUE+T Product Details
MAX4712CUE+T Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around 0°C~70°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 16 series. Multiplexers built on a SPST - NO switching circuit are built. 4 circuits are used in this analogue multiplexer. Using the MAX4712 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 25Ohm. The datasheets for the 16 pins explain the functions. Users should never supply a voltage higher than 11V to a switch device. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 2.7V as the lowest voltage for the electrical part. A digital multiplexer may suffer damage if voltage is applied above 65μA. There is no problem with using dual supply voltage, but it should not exceed 5.5V. In the case of dual power supplies, you should connect at least 2.7V. Operating voltages range from 5.5V. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V.
MAX4712CUE+T Features
1 Channels Switch Circuit: SPST - NO Additional Features: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V
MAX4712CUE+T Applications
There are a lot of Maxim Integrated MAX4712CUE+T Analog Switches & Multiplexers ICs applications.
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads