SY100E131JY Overview

The flip flop is packaged in 28-LCC (J-Lead). There is an embedded version in the package Tube. This output is configured with Differential. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A voltage of -4.2V~-5.5Vis required for its operation. Currently, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 100Eseries contain this type of chip. It should not exceed 1.4GHzin its output frequency. In total, there are 1 elements. A total of 28 terminations have been made. The 100E131family includes it. A part of the electronic system is mounted in the way of Surface Mount. With its 28pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. An electronic part designed with 4bits is used in this application. It has 4lines. It consumes 70mA current.

SY100E131JY Features

Tube package
100E series
28 pins
4 Bits

SY100E131JY Applications

There are a lot of Microchip Technology SY100E131JY Flip Flops applications.

• Consumer
• Cold spare funcion
• Shift Registers
• Count Modes
• Bounce elimination switch
• Circuit Design
• Single Up Count-Control Line
• Instrumentation
• Storage Registers
• Modulo – n – counter