SY10EP31VZG Overview
8-SOIC (0.154, 3.90mm Width)is the packaging method. It is contained within the Tubepackage. As configured, the output uses Differential. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. A voltage of -3.3V~-5Vis required for its operation. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 10EP series. In order for it to function properly, its output frequency should not exceed 3GHz. D latch consists of 1 elements. There is 45mA quiescent consumption. The 10EP31 family contains this object. It is mounted in the way of Surface Mount. A total of 8pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. It is designed with a number of bits of 1. The superior flexibility of this circuit is achieved by using 1 circuits. There are 1 output lines in this JK flip flop. The number of input lines is 1. Despite external influences, it consumes 45mAof quiescent current. There is -50mA output current at the high level. A 50mAvalue is set for low-level output current. Operating temperatures should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. Despite its minimal supply voltage of -2.97V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. This frequency can be achieved at 3GHz.
SY10EP31VZG Features
Tube package
10EP series
8 pins
1 Bits
SY10EP31VZG Applications
There are a lot of Microchip Technology SY10EP31VZG Flip Flops applications.
- QML qualified product
- Synchronous counter
- Supports Live Insertion
- Latch-up performance
- High Performance Logic for test systems
- Patented noise
- Convert a momentary switch to a toggle switch
- Guaranteed simultaneous switching noise level
- Storage Registers
- ESD performance
