74HC574D,653 Overview

The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. Currently, the operating temperature is -40°C~125°C TA. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 133MHz. A total of 1 elements are present. This process consumes 8μA quiescents. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 74HC574 family. A voltage of 5V provides power to the D latch. A 3.5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HC/UH. This board is designed with 20pins on it. Vsup reaches its maximum value at 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. The D flip flop has no ports embedded. It offers maximum design flexibility with its output current of 7.8mA. In addition, BROADSIDE VERSION OF 374is a characteristic of it.

74HC574D,653 Features

Tape & Reel (TR) package
74HC series
20 pins

74HC574D,653 Applications

There are a lot of Nexperia USA Inc. 74HC574D,653 Flip Flops applications.

• Matched Rise and Fall
• Communications
• Functionally equivalent to the MC10/100EL29
• ATE
• Storage registers
• Digital electronics systems
• Differential Individual
• Bus hold
• Frequency Dividers
• Load Control