74LVC74ADB,118 Overview

14-SSOP (0.209, 5.30mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. There is a Differentialoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.2V~3.6V volts. A temperature of -40°C~125°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. The 74LVCseries comprises this type of FPGA. A frequency of 250MHzshould be the maximum output frequency. A total of 2 elements are present. As a result, it consumes 10μA of quiescent current without being affected by external factors. The 74LVC74 family contains this object. Its input capacitance is 4pFfarads. There is an electronic part that is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device has the clock edge trigger type of Positive Edge. The design is based on 2bits. 2 circuits are used to achieve its superior flexibility. The JK flip flop is with 1 output lines to operate. It is reported that there are 1 input lines. There is -24mA output current at the high level. In the low level output current setting, the current is set to 24mA. A temperature below 125°Cshould be used for operation. Operating temperatures should be above -40°C. The minimum voltage required for operation is 1.2V. It supports the maximal supply voltage of 3.6V. This frequency can be achieved at 120MHz.

74LVC74ADB,118 Features

Tape & Reel (TR) package
74LVC series
14 pins
2 Bits

74LVC74ADB,118 Applications

There are a lot of Nexperia USA Inc. 74LVC74ADB,118 Flip Flops applications.

• Frequency Dividers
• Balanced Propagation Delays
• Storage Registers
• Registers
• Guaranteed simultaneous switching noise level
• Event Detectors
• Automotive
• Consumer
• Asynchronous counter
• Modulo – n – counter