74ABT16823ADL,518 Overview

The package is in the form of 56-BSSOP (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74ABTseries of FPGAs. Its output frequency should not exceed 190MHz Hz. A total of 2 elements are present. It consumes 1mA of quiescent In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74ABT16823 family. Power is provided by a 5V supply. A JK flip flop with a 4pFfarad input capacitance is used here. In this case, the D flip flop belongs to the ABTfamily. There is a base part number FF/Latchesfor the RS flip flops. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 4.5V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. The flip flop has 2embedded ports. Additionally, there are WITH CLEAR AND CLOCK ENABLE on the electronic flip flop that can be referred to.

74ABT16823ADL,518 Features

Tape & Reel (TR) package
74ABT series
5V power supplies

74ABT16823ADL,518 Applications

There are a lot of NXP USA Inc. 74ABT16823ADL,518 Flip Flops applications.

• Pattern generators
• Guaranteed simultaneous switching noise level
• Memory
• Parallel data storage
• QML qualified product
• Balanced 24 mA output drivers
• Safety Clamp
• Control circuits
• Power down protection
• Common Clocks