74ABT273CSC Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. D flip flop is embedded in the Tube package. There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis required for its operation. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74ABTseries contain this type of chip. This D flip flop should not have a frequency greater than 200MHz. A total of 1elements are contained within it. Despite external influences, it consumes 50μAof quiescent current. It is a member of the 74ABT273 family. A JK flip flop with a 5pFfarad input capacitance is used here. Surface Mount mounts this electronic component. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The flip flop is designed with 8bits. Its flexibility is enhanced by 8 circuits. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are no output lines on the JK flip flop. This input has 3lines. High level output current is set to -32mA. In the low level output current setting, the current is set to 64mA. A temperature below 85°Cis recommended for operation. Ideally, the operating temperature should be higher than -40°C. In order for it to operate, a supply voltage of 4.5Vis required. There is a maximum supply voltage of 5.5V. A frequency of 200MHzcan be achieved.

74ABT273CSC Features

Tube package
74ABT series
20 pins
8 Bits

74ABT273CSC Applications

There are a lot of ON Semiconductor 74ABT273CSC Flip Flops applications.

• Bounce elimination switch
• EMI reduction circuitry
• Event Detectors
• Convert a momentary switch to a toggle switch
• QML qualified product
• Matched Rise and Fall
• Differential Individual
• Data storage
• Computing
• Load Control