MC10E451FNR2 Overview

The package is in the form of 28-LCC (J-Lead). It is contained within the Tape & Reel (TR)package. In the configuration, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. It operates with a supply voltage of -4.2V~-5.7V. Temperature is set to 0°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 10E series. It should not exceed 1.1GHzin terms of its output frequency. The element count is 1 . As a result, it consumes 101mA of quiescent current without being affected by external factors. There are 28 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 10E451. It is powered by a voltage of 5V . Electronic devices of this type belong to the 10Efamily. It is mounted in the way of Surface Mount. The 28pins are designed into the board. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. Vsup reaches its maximum value at 5.7V. Its superior flexibility is attributed to its use of 2 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. There is 50mA output current at the high level. 50mA is the low level output current.

MC10E451FNR2 Features

Tape & Reel (TR) package
10E series
28 pins

MC10E451FNR2 Applications

There are a lot of ON Semiconductor MC10E451FNR2 Flip Flops applications.

• ATE
• Event Detectors
• Single Down Count-Control Line
• Synchronous counter
• High Performance Logic for test systems
• Balanced 24 mA output drivers
• Matched Rise and Fall
• Cold spare funcion
• Asynchronous counter
• Frequency Divider circuits