SY10EP52VKG Overview
The flip flop is packaged in a case of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). It is included in the package Tube. The output it is configured with uses Differential. This trigger uses the value Positive, Negative. There is an electric part mounted in the way of Surface Mount. With a supply voltage of -3V~-5.5V volts, it operates. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 10EPseries of FPGAs. In order for it to function properly, its output frequency should not exceed 4GHz. There are 1 elements in it. There is a consumption of 47mAof quiescent energy. A total of 8 terminations have been made. The 10EP52 family contains it. It is powered from a supply voltage of 3.3V. In this case, the D flip flop belongs to the 10Efamily. An electronic part with 1bits has been designed. As soon as Vsup reaches 3.63V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be kept above 2.97V. Additionally, there are NECL MODE OPERATING RANGE: VCC=0V, VEE=-3.3V TO -5.5V on the electronic flip flop that can be referred to.
SY10EP52VKG Features
Tube package
10EP series
1 Bits
SY10EP52VKG Applications
There are a lot of Microchip Technology SY10EP52VKG Flip Flops applications.
- Automotive
- EMI reduction circuitry
- Storage Registers
- Memory
- Count Modes
- Data transfer
- Frequency Divider circuits
- Common Clocks
- Power down protection
- Consumer
