MC74HC273ANG Overview

In the form of 20-DIP (0.300, 7.62mm), it has been packaged. It is included in the package Tube. The output it is configured with uses Non-Inverted. This trigger uses the value Positive Edge. There is an electronic component mounted in the way of Through Hole. The JK flip flop operates at 2V~6Vvolts. It is operating at a temperature of -55°C~125°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. There have been 20 terminations. Members of the 74HC273family make up this object. A voltage of 3V provides power to the D latch. Input capacitance of this device is 10pF farads. This D flip flop belongs to the family of HC/UH. There is an electronic component mounted in the way of Through Hole. There are 20pins on it. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. Flip flops designed with 8bits are used in this part. There is a 6Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 8 circuits. As a result of its reliability, this D flip flop is ideally suited for RAIL. The power supply is 2/6V. With an output current of 7.8mA, it is possible to design the device in any way you want. There are 8 output lines on it.

MC74HC273ANG Features

Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

MC74HC273ANG Applications

There are a lot of ON Semiconductor MC74HC273ANG Flip Flops applications.

• Memory
• Test & Measurement
• Data storage
• Frequency Divider circuits
• Modulo – n – counter
• Frequency division
• Convert a momentary switch to a toggle switch
• Functionally equivalent to the MC10/100EL29
• Registers
• Balanced Propagation Delays