MM74HCT74M Overview

In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. It is included in the package Tube. This output is configured with Differential. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typeis the type of this D latch. FPGAs belonging to the 74HCTseries contain this type of chip. Its output frequency should not exceed 27MHz Hz. There have been 14 terminations. Members of the 74HCT74family make up this object. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 5pF farads. In this case, the D flip flop belongs to the HCTfamily. The electronic part is mounted in the way of Surface Mount. It is designed with 14 pins. The clock edge trigger type for this device is Positive Edge. The part you are looking for is included in FF/Latches. Due to its reliability, this T flip flop is well suited for RAIL. A total of 5V power supplies are needed to run it. If high efficiency is desired, the supply voltage should be kept at 5V. Its output current of 4.8mAallows for maximum design flexibility. It is designed with 1 output lines. It consumes a total of 2μA quiescent current at any given time. It is of 2 channels.

MM74HCT74M Features

Tube package
74HCT series
14 pins
5V power supplies

MM74HCT74M Applications

There are a lot of ON Semiconductor MM74HCT74M Flip Flops applications.

• Pattern generators
• Patented noise
• 2 – Bit synchronous counter
• Load Control
• EMI reduction circuitry
• Supports Live Insertion
• Data storage
• Frequency division
• Clock pulse
• Frequency Divider circuits