MPSA43RLRAG Overview
This device has a DC current gain of 25 @ 1mA 10V, which is the ratio between the base current and the collector current.The collector emitter saturation voltage is 500mV, giving you a wide variety of design options.When VCE saturation is 500mV @ 2mA, 20mA, transistor means Ic has reached transistors maximum value (saturated).The emitter base voltage can be kept at 6V for high efficiency.Normally, a fuse's current rating refers to how much current it can carry without deteriorating too much, which in this case is 500mA.50MHz is present in the transition frequency.Collector current can be as low as 500mA volts at its maximum.
MPSA43RLRAG Features
the DC current gain for this device is 25 @ 1mA 10V
a collector emitter saturation voltage of 500mV
the vce saturation(Max) is 500mV @ 2mA, 20mA
the emitter base voltage is kept at 6V
the current rating of this device is 500mA
a transition frequency of 50MHz
MPSA43RLRAG Applications
There are a lot of ON Semiconductor MPSA43RLRAG applications of single BJT transistors.
- Interface
- Inverter
- Muting
- Driver
