MPSW92RLRA Overview
As the DC current gain is the ratio of the collector current to the base current, for this device the DC current gain is 25 @ 30mA 10V.The collector emitter saturation voltage is -500mV, giving you a wide variety of design options.In VCE saturation, Ic is at its maximum value (saturated), and the vce saturation (Max) is 500mV @ 2mA, 20mA.The base voltage of the emitter can be kept at 5V to achieve high efficiency.According to definition, current rating describes the maximum current a fuse can carry indefinitely without deteriorating too much, and this device has no current rating.As you can see, the part has a transition frequency of 50MHz.In extreme cases, the collector current can be as low as 500mA volts.
MPSW92RLRA Features
the DC current gain for this device is 25 @ 30mA 10V
a collector emitter saturation voltage of -500mV
the vce saturation(Max) is 500mV @ 2mA, 20mA
the emitter base voltage is kept at 5V
the current rating of this device is -500mA
a transition frequency of 50MHz
MPSW92RLRA Applications
There are a lot of ON Semiconductor MPSW92RLRA applications of single BJT transistors.
- Driver
-
- Muting
-
- Interface
-
- Inverter
-
