NLAST4501DFT2 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 5-TSSOP, SC-70-5, SOT-353. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -55°C~125°C TA are extended for operation. There are 5 terminations totally. High-quality output is provided by the electronic component's 1 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 5 pins. Unlike digital switches, these are based on SPST - NO switching circuits. 1 circuits are used in this analogue multiplexer. Using the NLAST4501 search parameter, you can discover variants of the switch. A 30Ohm internal resistance characterizes this multiplexer. For functions related to 5 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2V. For this multiplexer to operate, 1μA current would be sufficient. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. When the digital multiplexer is charged above 1μA, damage can occur. The electrical part can be operated at 5V voltage levels.

NLAST4501DFT2 Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 220MHz

NLAST4501DFT2 Applications

There are a lot of ON Semiconductor NLAST4501DFT2 Analog Switches & Multiplexers ICs applications.

• E1 Network Equipment
• HDTV
• 65 V DACs
• PCMCIA cards
• PDH Multiplexers
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Cell phones
• T1/E1 Terminals
• Data switching
• Public switching systems