SN74ALS876ANT Overview

In the form of 24-DIP (0.300, 7.62mm), it has been packaged. It is included in the package Tube. As configured, the output uses Tri-State, Inverted. The trigger configured with it uses Positive Edge. It is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. Temperature is set to 0°C~70°C TA. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74ALS series. You should not exceed 30MHzin its output frequency. A total of 2elements are contained within it. It consumes 21mA of quiescent current without being affected by external factors. It has been determined that there have been 24 terminations. Power is supplied from a voltage of 5V volts. It is a member of the ALSfamily of D flip flop. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Additionally, you may refer to the additional WITH PRESET of the electronic flip flop.

SN74ALS876ANT Features

Tube package
74ALS series

SN74ALS876ANT Applications

There are a lot of Rochester Electronics, LLC SN74ALS876ANT Flip Flops applications.

• Frequency Divider circuits
• Functionally equivalent to the MC10/100EL29
• Power down protection
• Balanced Propagation Delays
• Load Control
• Synchronous counter
• Differential Individual
• EMI reduction circuitry
• Cold spare funcion
• Reduced system switching noise