SI5335D-B04150-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. This clock generator is embedded in the 24-VFQFN Exposed Pad package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 24 terminations. Basically, this time clock generator needs a voltage of 1.8V. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock PLL is capable of receiving a maximum of 1.98V as a supply voltage. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. There should be a voltage supply above 1.71V for this frequency generator in order to ensure its safety. A frequency generator that runs over 85°C may cause ha85°Cards. Synthesi200MHzing a clock output frequency of 200MHz is possible with this clock-generator. This frequency generator may fail to start up if the ambient temp is lower than -40°C. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.

SI5335D-B04150-GMR Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335D-B04150-GMR Applications

There are a lot of Silicon Labs SI5335D-B04150-GMR Clock Generators applications.

• Main oscillator in receiver
• FSK demodulators
• Bluetooth transmitters
• Walkie-talkies
• Notebooks
• Frequency shifting decodes
• Media broadcast servers
• High-frequency induction heating
• Laptops
• Antenna automatic tracking