74VHC574MTR Overview

The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. It is at -55°C~125°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. JK flip flop is a part of the 74VHCseries of FPGAs. Its output frequency should not exceed 115MHz Hz. The element count is 1 . There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74VHC574 family. A voltage of 3.3V provides power to the D latch. Its input capacitance is 7pF farads. AHC/VHCis the family of this D flip flop. There is an electronic part mounted in the way of Surface Mount. This board is designed with 20pins on it. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. It is designed with a number of bits of 8. 5.5Vis the maximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. It operates from 2/5.5V power supplies. The flip flop has 2embedded ports. The JK flip flop is with 3 output lines to operate. There is 4μA quiescent current consumption by it.

74VHC574MTR Features

Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies

74VHC574MTR Applications

There are a lot of STMicroelectronics 74VHC574MTR Flip Flops applications.

• Latch
• Counters
• Differential Individual
• Set-reset capability
• ESD protection
• Frequency Dividers
• Automotive
• Shift Registers
• Balanced 24 mA output drivers
• QML qualified product