74ALVTH32374ZKER Overview

The flip flop is packaged in 96-LFBGA. Package Tape & Reel (TR)embeds it. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 2.3V~2.7V 3V~3.6V volts, it operates. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74ALVTHseries of FPGAs. You should not exceed 250MHzin the output frequency of the device. There are 4 elements in it. A total of 96 terminations have been made. This D latch belongs to the family of 74ALVTH32374. The power supply voltage is 2.5V. A JK flip flop with a 3.5pFfarad input capacitance is used here. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 96 pins. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. It is designed with a number of bits of 32. 2.7Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 2.3V. Considering its reliability, this T flip flop is well suited for TR. The D latch operates on 2.5/3.3V volts. The D flip flop is embedded with 2ports. To operate, the chip has a total of 8 output lines. It consumes a total of 100μA quiescent current at any given time.

74ALVTH32374ZKER Features

Tape & Reel (TR) package
74ALVTH series
96 pins
32 Bits
2.5/3.3V power supplies

74ALVTH32374ZKER Applications

There are a lot of Texas Instruments 74ALVTH32374ZKER Flip Flops applications.

• EMI reduction circuitry
• Power down protection
• Guaranteed simultaneous switching noise level
• ATE
• Common Clocks
• Frequency division
• Frequency Dividers
• Buffer registers
• QML qualified product
• Pattern generators