SN74BCT574DBR Overview

The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. You can find it in the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of 0°C~70°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74BCT series. A frequency of 77MHzshould not be exceeded by its output. A total of 1 elements are present. It consumes 8mA of quiescent current without being affected by external factors. A total of 20terminations have been recorded. The object belongs to the 74BCT574 family. A voltage of 5V is used to power it. The input capacitance of this T flip flop is 5.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. BCT/FBTis the family of this D flip flop. Surface Mount mounts this electronic component. With its 20pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. There is a 5.5Vmaximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There are 5V power supplies attached to it. There are 2 ports embedded in the flip flops. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It has 8lines.

SN74BCT574DBR Features

Tape & Reel (TR) package
74BCT series
20 pins
8 Bits
5V power supplies

SN74BCT574DBR Applications

There are a lot of Texas Instruments SN74BCT574DBR Flip Flops applications.

• Synchronous counter
• Individual Asynchronous Resets
• Bounce elimination switch
• Frequency Divider circuits
• Latch
• Divide a clock signal by 2 or 4
• Counters
• Digital electronics systems
• Bus hold
• Clock pulse