CD4052BPWRG3 Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. In total, there are 16 terminations. Due to its 4 channels, the electrical component produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. 16 pins are injected to the electronic part body. A SP4T switching circuit is used for these analog switches. Circuits number 2 make up this analogue multiplexer. Try searching for CD4052 variants of the analog switch ic. The internal resistance of this digital multiplexer is 240Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 3V. For this digital switch to work, 80nA current would suffice. Despite this switch's dual supply capability, its voltage should not exceed 9V. When using dual power supplies, you should attach at least 2.5V. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. 18V operating voltages are supported by the electronic component. Operating the 8 inputs requires 8 inputs. The data can be transferred over a wide range of bandwidths, called 25MHz bandwidths. 4-bit conductivity is possible.

CD4052BPWRG3 Features

4 Channels
Switch Circuit: SP4T
80nA Supply Current
Bandwidth: 25MHz
4-Bit

CD4052BPWRG3 Applications

There are a lot of Texas Instruments CD4052BPWRG3 Analog Switches & Multiplexers ICs applications.

• Power routing
• T1/E1 Terminals
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• PDAs
• E1 Network Equipment
• Video switching
• Central office
• Isolation
• Fiber to the Home
• Data Acquisition Systems