CD4052BPWRG4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. It is injected into the electrical part body with 16 pins. These analog multiplexers are built based on SP4T switching circuits. The multiplexer consists of 2 circuits. Try searching for the analog switch ic with CD4052 if you are looking for variants. It has an internal resistance of 240Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 3V. It would be sufficient to run this analogue multiplexer with 80nA current. If put voltage greater than 9V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 2.5V. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Operating voltages range from 18V. The 8 inputs need to be operated in order to work. A 25MHz-bandwidth can be used for data transfer. 4-bits are supported.

CD4052BPWRG4 Features

4 Channels
Switch Circuit: SP4T
80nA Supply Current
Bandwidth: 25MHz
4-Bit

CD4052BPWRG4 Applications

There are a lot of Texas Instruments CD4052BPWRG4 Analog Switches & Multiplexers ICs applications.

• Sample hold systems
• Medical systems
• Medical
• Industrial and process control systems
• Optical Applications
• Microwave transmission systems
• Communications systems
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Cable PC
• Automatic test equipment