CD74HC173NSRG4 Overview
The item is packaged in 16-SOIC (0.209, 5.30mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 2V~6V. The operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74HC series. It should not exceed 60MHzin terms of its output frequency. The list contains 1 elements. This process consumes 8μA quiescents. A total of 16terminations have been recorded. The 74HC173 family contains it. The D flip flop is powered by a voltage of 4.5V . Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It is designed with a number of bits of 4. The maximal supply voltage (Vsup) reaches 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It runs on 5Vvolts of power. With an output current of 7.8mA, it is possible to design the device in any way you want. Currently, there are 4 lines of input. There is also a characteristic of WITH DUAL OUTPUT ENABLE.
CD74HC173NSRG4 Features
Tape & Reel (TR) package
74HC series
16 pins
4 Bits
5V power supplies
CD74HC173NSRG4 Applications
There are a lot of Texas Instruments CD74HC173NSRG4 Flip Flops applications.
- 2 – Bit synchronous counter
- Modulo – n – counter
- Clock pulse
- Count Modes
- Memory
- Divide a clock signal by 2 or 4
- Automotive
- Dynamic threshold performance
- QML qualified product
- Bus hold
