CD74HC73M96G4 Overview
The package is in the form of SOIC. The element count is 2 . 14terminations have occurred. It is powered by a voltage of 4.5V . A device of this type belongs to the family of HC/UH. It is mounted in the way of Surface Mount. There are 14pins on it. The clock edge trigger type for this device is Negative Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part with 2bits has been designed. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. There are no output lines on the JK flip flop. There is 4μA quiescent current consumption by it. A high level output current of -5.2mAis set. In the low level output current setting, the current is set to 5.2mA. Ideally, the operating temperature should be below 125°C. If the operating temperature is higher than -55°C, the system should operate properly. In order for it to operate, a supply voltage of 2Vis required. A maximum voltage of 6V can be provided by it. This frequency can be achieved at 60MHz. There is a logic IC J-K FLIP-FLOP used in the D flip flop. It has 2 functions. 14pins are available on this JK flip flop. With an output current of 5.2mA, this flip flop offers maximum design flexibility.
CD74HC73M96G4 Features
14 pins
2 Bits
2 Functions
14 pin count
CD74HC73M96G4 Applications
There are a lot of Texas Instruments
CD74HC73M96G4 Flip Flops applications.
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
