CD74ACT174M96G4 Overview
As a result, it is packaged as SOIC. There are 1 elements in it. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 5V. It is a member of the ACTfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. As a result of its reliability, this D flip flop is ideally suited for TR. There are 5V power supplies attached to it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. As a result, it consumes 8μA of quiescent current without being affected by external factors. High level output current is set to -24mA. Low level output current is set to 24mA. A temperature below 125°Cshould be used for operation. Ideally, the operating temperature should be greater than -55°C. The minimal supply voltage is 4.5V. The maximum supply voltage supported by the flip flop is 5.5V. It is possible to achieve a frequency of 80MHz. It adopts a logic IC of type D FLIP-FLOP. The T flip flop is equipped with 1functions . The JK flip flop has a pin count of 16. 24mA provides maximum design flexibility due to its output current.
CD74ACT174M96G4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74ACT174M96G4 Applications
There are a lot of Texas Instruments
CD74ACT174M96G4 Flip Flops applications.
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
