SN74HC574NS Overview

20-SOIC (0.209, 5.30mm Width)is the way it is packaged. It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. D-Typeis the type of this D latch. The 74HCseries comprises this type of FPGA. Its output frequency should not exceed 36MHz. In total, there are 1 elements. It consumes 8μA of quiescent A total of 20 terminations have been made. This D latch belongs to the family of 74HC574. The D flip flop is powered by a voltage of 5V . JK flip flop input capacitance is 3pF farads. Electronic devices of this type belong to the HC/UHfamily. There is a FF/Latchesbase part number assigned to the RS flip flops. As soon as Vsup reaches 6V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be above 2V. Considering its reliability, this T flip flop is well suited for TR. A power supply of 2/6Vis required to operate it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.

SN74HC574NS Features

Tube package
74HC series
2/6V power supplies

SN74HC574NS Applications

There are a lot of Texas Instruments SN74HC574NS Flip Flops applications.

• Shift Registers
• Cold spare funcion
• Individual Asynchronous Resets
• Shift registers
• Digital electronics systems
• Safety Clamp
• Synchronous counter
• Data Synchronizers
• Frequency Divider circuits
• ATE