CY74FCT821ATSOCTG4 Overview

As a result, it is packaged as 24-SOIC (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. This output is configured with Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. It is operating at -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74FCT series. D latch consists of 1 elements. As a result, it consumes 200μA quiescent current and is not affected by external forces. A total of 24 terminations have been made. The 74FCT821 family contains it. An input voltage of 5Vpowers the D latch. Its input capacitance is 5pFfarads. FCTis the family of this D flip flop. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 24 pins. This device's clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. There are 10bits in this flip flop. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. There are 5V power supplies attached to it. A D flip flop with 2embedded ports is available. In order to achieve high efficiency, the supply voltage should be maintained at 5V. A total of 10input lines have been provided.

CY74FCT821ATSOCTG4 Features

Tape & Reel (TR) package
74FCT series
24 pins
10 Bits
5V power supplies

CY74FCT821ATSOCTG4 Applications

There are a lot of Texas Instruments CY74FCT821ATSOCTG4 Flip Flops applications.

• Frequency division
• ATE
• Consumer
• Count Modes
• Communications
• Synchronous counter
• EMI reduction circuitry
• Set-reset capability
• QML qualified product
• Bus hold