MPC507AU/1K Overview

As the electronic part is packed in 28-SOIC (0.295, 7.50mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. 28 terminations have been made so far. The electronic part delivers high-quality output through its 2 channels. An 15V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 28 series. It consists of 2 circuits. Look for analog switch ic variants by searching with MPC507. There is 1.5kOhm internal resistance in this digital multiplexer. Please refer to the datasheets for 28 pins functions. The digital multiplexer has a low cost Dual supply. In order to operate this switch device, it would need a current of 700μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VThe voltage should be at least 5V if you are using dual power supplies. A total of COMMON OUTPUT outputs are available on this analog switch ic. A voltage of 18V can be used to operate the electronic component. A 16 input needs to be operated.

MPC507AU/1K Features

2 Channels
700μA Supply Current

MPC507AU/1K Applications

There are a lot of Texas Instruments MPC507AU/1K Analog Switches & Multiplexers ICs applications.

• Voice over IP/DSL – Integrated Access Devices, Smart
• Digital Cross-Connects
• DSUs
• Sample hold systems
• FTTH
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Low-Voltage
• Audio/video switches
• High reliability control systems
• Cross Connects