SN74AC534DWR Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. T flip flop uses Tri-State, Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 2V~6Vvolts. In this case, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. FPGAs belonging to the 74ACseries contain this type of chip. You should not exceed 150MHzin the output frequency of the device. A total of 1 elements are present. This process consumes 4μA quiescents. There are 20 terminations,If you search by 74AC534, you will find similar parts. A voltage of 3.3V provides power to the D latch. Input capacitance of this device is 4.5pF farads. An electronic device belonging to the family ACcan be found here. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 8bits in this flip flop. 6Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. The D flip flop has no ports embedded. With an output current of 24mA, this device offers maximum design flexibility. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74AC534DWR Features

Tape & Reel (TR) package
74AC series
20 pins
8 Bits

SN74AC534DWR Applications

There are a lot of Texas Instruments SN74AC534DWR Flip Flops applications.

• Counters
• Shift Registers
• Matched Rise and Fall
• Shift registers
• Clock pulse
• Count Modes
• Circuit Design
• Safety Clamp
• ATE
• Instrumentation