SN74ACT534DBR Overview

The package is in the form of 20-SSOP (0.209, 5.30mm Width). It is contained within the Cut Tape (CT)package. It is configured with Tri-State, Invertedas an output. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74ACTseries of FPGAs. You should not exceed 100MHzin the output frequency of the device. The element count is 1 . As a result, it consumes 4μA quiescent current. The number of terminations is 20. This D latch belongs to the family of 74ACT534. Power is supplied from a voltage of 5V volts. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the ACTfamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. It is designed with 8bits. The superior flexibility of this product is achieved by using 8 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. In order for the device to operate, it requires 5V power supplies. The flip flop has 2ports embedded within it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. The 24mA output current allows it to be designed with the greatest amount of flexibility. This input has 3lines in it.

SN74ACT534DBR Features

Cut Tape (CT) package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT534DBR Applications

There are a lot of Texas Instruments SN74ACT534DBR Flip Flops applications.

• Registers
• Data storage
• Digital electronics systems
• Instrumentation
• Clock pulse
• Convert a momentary switch to a toggle switch
• Bus hold
• Balanced 24 mA output drivers
• Single Down Count-Control Line
• CMOS Process