SN74ACT574DWRG4 Overview
As a result, it is packaged as SOIC. The package Tape and Reelcontains it. There are 1 elements in it. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 5V. It is a member of the ACTfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. There are 5V power supplies attached to it. There are 2 ports embedded in the flip flops. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. BROADSIDE VERSION OF 374is also one of its characteristics. High level output current is set to -24mA. Low level output current is set to 24mA. A temperature below 85°Cshould be used for operation. Ideally, the operating temperature should be greater than -40°C. The minimal supply voltage is 4.5V. The maximum supply voltage supported by the flip flop is 5.5V. It is possible to achieve a frequency of 110MHz. It adopts a logic IC of type BUS DRIVER. The T flip flop is equipped with 1functions . The JK flip flop has a pin count of 20. 24mA provides maximum design flexibility due to its output current.
SN74ACT574DWRG4 Features
Tape and Reel package
20 pins
5V power supplies
1 Functions
20 pin count
SN74ACT574DWRG4 Applications
There are a lot of Texas Instruments
SN74ACT574DWRG4 Flip Flops applications.
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
