SN74AHC174DBR Overview

16-SSOP (0.209, 5.30mm Width)is the way it is packaged. You can find it in the Cut Tape (CT)package. T flip flop is configured with an output of Non-Inverted. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~5.5V is required for operation. A temperature of -40°C~85°C TAis used in the operation. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74AHCseries FPGA. It should not exceed 180MHzin its output frequency. A total of 1elements are contained within it. As a result, it consumes 4μA quiescent current. A total of 16terminations have been recorded. Members of the 74AHC174family make up this object. The power source is powered by 3.3V. JK flip flop input capacitance is 1.7pF farads. This D flip flop belongs to the family of AHC/VHC/H/U/V. It is mounted by the way of Surface Mount. It is designed with 16 pins. There is a clock edge trigger type of Positive Edgeon this device. The part is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. To achieve this superior flexibility, 7 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. The D latch operates on 2/5.5V volts. With an output current of 8mA, this device offers maximum design flexibility. Currently, there are 3 lines of input.

SN74AHC174DBR Features

Cut Tape (CT) package
74AHC series
16 pins
2/5.5V power supplies

SN74AHC174DBR Applications

There are a lot of Texas Instruments SN74AHC174DBR Flip Flops applications.

• Reduced system switching noise
• Shift registers
• Divide a clock signal by 2 or 4
• ESD performance
• Cold spare funcion
• Count Modes
• Clock pulse
• Test & Measurement
• EMI reduction circuitry
• Matched Rise and Fall