SN74HC273DWR Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. T flip flop uses Non-Invertedas the output. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. A 2V~6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. JK flip flop belongs to the 74HCseries of FPGAs. It should not exceed 60MHzin terms of its output frequency. D latch consists of 1 elements. The number of terminations is 20. The object belongs to the 74HC273 family. It is powered by a voltage of 5V . Input capacitance of this device is 3pF farads. A device of this type belongs to the family of HC/UH. Surface Mount mounts this electronic component. The 20pins are designed into the board. It has a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. The design is based on 8bits. Vsup reaches its maximum value at 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. In order to achieve its superior flexibility, 8 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TR. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. Featuring the maximum design flexibility, it has an output current of 5.2mA . A total of 2input lines have been provided. As a result, it consumes 8μA of quiescent current without being affected by external factors. Furthermore, it has DUMMY VALas a characteristic.

SN74HC273DWR Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits

SN74HC273DWR Applications

There are a lot of Texas Instruments SN74HC273DWR Flip Flops applications.

• Parallel data storage
• Instrumentation
• Data transfer
• Functionally equivalent to the MC10/100EL29
• Bus hold
• Test & Measurement
• Digital electronics systems
• Buffer registers
• Registers
• Supports Live Insertion