SN74AHC374PWE4 Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74AHCseries FPGA. It should not exceed 120MHzin terms of its output frequency. A total of 1elements are contained within it. As a result, it consumes 4μA quiescent current. It has been determined that there have been 20 terminations. Members of the 74AHC374family make up this object. It is powered from a supply voltage of 3.3V. JK flip flop input capacitance is 4pF farads. In terms of electronic devices, this device belongs to the AHC/VHC/H/U/Vfamily of devices. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The RS flip flops belongs to Bus Driver/Transceiver base part number. An electronic part with 8bits has been designed. 5.5Vis the maximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Due to its superior flexibility, it uses 8 circuits. It runs on 2/5.5Vvolts of power. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With an output current of 8mA, it is possible to design the device in any way you want. Currently, there are 3 lines of input.
SN74AHC374PWE4 Features
Tube package
74AHC series
20 pins
8 Bits
2/5.5V power supplies
SN74AHC374PWE4 Applications
There are a lot of Texas Instruments SN74AHC374PWE4 Flip Flops applications.
- Matched Rise and Fall
- Latch-up performance
- EMI reduction circuitry
- Digital electronics systems
- Counters
- Synchronous counter
- Shift Registers
- Divide a clock signal by 2 or 4
- Latch
- Modulo – n – counter
