SN74AHCT273DWG4 Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. T flip flop is configured with an output of Non-Inverted. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74AHCTseries FPGA. Its output frequency should not exceed 75MHz. A total of 1elements are present in it. During its operation, it consumes 4μA quiescent energy. Terminations are 20. The 74AHCT273 family contains this object. The power source is powered by 5V. There is 2.5pF input capacitance for this T flip flop. An electronic device belonging to the family AHCT/VHCT/VTcan be found here. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. There are 5V power supplies attached to it. Optimal efficiency requires a supply voltage of 5V. 8input lines are available for you to choose from.

SN74AHCT273DWG4 Features

Tube package
74AHCT series
20 pins
8 Bits
5V power supplies

SN74AHCT273DWG4 Applications

There are a lot of Texas Instruments SN74AHCT273DWG4 Flip Flops applications.

• Shift registers
• High Performance Logic for test systems
• Matched Rise and Fall
• Parallel data storage
• Event Detectors
• Automotive
• Patented noise
• Pattern generators
• ESD performance
• Dynamic threshold performance