SN74AHCT374DBR Overview

The package is in the form of 20-SSOP (0.209, 5.30mm Width). As part of the package Cut Tape (CT), it is embedded. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74AHCT series. There should be no greater frequency than 130MHzon its output. In total, it contains 1 elements. This process consumes 4μA quiescents. It has been determined that there have been 20 terminations. You can search similar parts based on 74AHCT374. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 4pFfarads. This D flip flop belongs to the family of AHCT/VHCT/VT. There is an electronic part that is mounted in the way of Surface Mount. This board has 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part with 8bits has been designed. Its superior flexibility is attributed to its use of 8 circuits. In light of its reliable performance, this T flip flop is well suited for TR. The power supply is 5V. This D flip flop is equipped with 0 ports. If high efficiency is desired, the supply voltage should be kept at 5V. This input has 3lines.

SN74AHCT374DBR Features

Cut Tape (CT) package
74AHCT series
20 pins
8 Bits
5V power supplies

SN74AHCT374DBR Applications

There are a lot of Texas Instruments SN74AHCT374DBR Flip Flops applications.

• Memory
• Computers
• Guaranteed simultaneous switching noise level
• Consumer
• Asynchronous counter
• Power down protection
• Event Detectors
• CMOS Process
• Balanced Propagation Delays
• Divide a clock signal by 2 or 4