SN74AS109ADRG4 Overview

As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. Differentialis the output configured for it. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis considered to be the operating temperature. There is JK Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74ASseries FPGA. Its output frequency should not exceed 105MHz Hz. Despite external influences, it consumes 17mAof quiescent current. It has been determined that there have been 16 terminations. The 74AS109 family contains this object. A voltage of 5V is used to power it. ASis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. 16pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. 5.5Vis the maximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. With a current output of 20mA , it offers maximum design flexibility. It is reported that there are 2 input lines.

SN74AS109ADRG4 Features

Tape & Reel (TR) package
74AS series
16 pins

SN74AS109ADRG4 Applications

There are a lot of Texas Instruments SN74AS109ADRG4 Flip Flops applications.

• Frequency Dividers
• High Performance Logic for test systems
• Computers
• Divide a clock signal by 2 or 4
• Individual Asynchronous Resets
• Shift Registers
• Single Down Count-Control Line
• Digital electronics systems
• Storage registers
• Reduced system switching noise