SN74AS576DWE4 Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. T flip flop uses Tri-State, Invertedas its output configuration. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis required for its operation. A temperature of 0°C~70°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74AS series. In order for it to function properly, its output frequency should not exceed 125MHz. The element count is 1 . As a result, it consumes 125mA of quiescent current without being affected by external factors. There are 20 terminations,D latch belongs to the 74AS576 family. Power is supplied from a voltage of 5V volts. ASis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. It operates from 5V power supplies. This D flip flop is equipped with 0 ports. High efficiency requires the supply voltage to be maintained at 5V. Featuring the maximum design flexibility, it has an output current of 48mA . The number of input lines is 3.

SN74AS576DWE4 Features

Tube package
74AS series
20 pins
5V power supplies

SN74AS576DWE4 Applications

There are a lot of Texas Instruments SN74AS576DWE4 Flip Flops applications.

• Counters
• Frequency Divider circuits
• Digital electronics systems
• ATE
• Single Down Count-Control Line
• Pattern generators
• Registers
• Consumer
• Shift registers
• Bus hold