SN74AS874DW Overview

The package is in the form of 24-SOIC (0.295, 7.50mm Width). It is contained within the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. Temperature is set to 0°C~70°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74ASseries contain this type of chip. It should not exceed 125MHzin terms of its output frequency. The list contains 2 elements. During its operation, it consumes 133mA quiescent energy. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 74AS874 family. Power is supplied from a voltage of 5V volts. Devices in the ASfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. A total of 24pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. 8bits are used in its design. The D latch runs on a voltage of 5V volts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If high efficiency is desired, the supply voltage should be kept at 5V. It offers maximum design flexibility with its output current of 48mA. In order to operate, the chip has 1 output lines. Additionally, you may refer to the D latch's additional WITH CLEAR.

SN74AS874DW Features

Tube package
74AS series
24 pins
8 Bits
5V power supplies

SN74AS874DW Applications

There are a lot of Texas Instruments SN74AS874DW Flip Flops applications.

• Frequency Divider circuits
• Latch-up performance
• Common Clocks
• Memory
• Divide a clock signal by 2 or 4
• QML qualified product
• Convert a momentary switch to a toggle switch
• Frequency division
• Functionally equivalent to the MC10/100EL29
• Parallel data storage