SN74HC4851QPWRQ1 Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operational temperature extended around -40°C~125°C TA. 16 terminations have been made so far. The electronic part provides high-quality output because it has 8 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. The electronic part body is injected with 16 pins. There are 1 circuits in this switch device. Try searching for the analog switch ic with 74HC4851 if you are looking for variants. An switch multiplexer with 195Ohm internal resistance has a value of 195Ohm. To find out what the 16 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. 2V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 2μA. The voltage required by this switch device is 2V~6V, draining from a single voltage supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Operating the 8 inputs requires 8 inputs. It belongs to the series Automotive, AEC-Q100.

SN74HC4851QPWRQ1 Features

8 Channels
2μA Supply Current

SN74HC4851QPWRQ1 Applications

There are a lot of Texas Instruments SN74HC4851QPWRQ1 Analog Switches & Multiplexers ICs applications.

• PBX interfaces
• Low-Voltage
• ISDN NT1/TA
• Multi-Line E1 Interface Cards
• Remote Powered Equipment
• Audio signal routing
• Remote wireless modules
• Avionics and Military Systems
• Microwave transmission systems
• Video switching