Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74AS4374BDWG4

SN74AS4374BDWG4

SN74AS4374BDWG4

Texas Instruments

4.5V~5.5V 125MHz 8 Bit D-Type Flip Flop DUAL 74AS4374 20 Pins 150mA 74AS Series 20-SOIC (0.295, 7.50mm Width)

SOT-23

SN74AS4374BDWG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Operating Temperature0°C~70°C TA
PackagingTube
Series 74AS
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Type D-Type
Additional FeatureDUAL-RANK FLIP-FLOP
Subcategory FF/Latches
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Supply Voltage 5V
[email protected] Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74AS4374
Function Standard
Qualification StatusNot Qualified
Output Type Tri-State, Non-Inverted
Number of Elements 1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies5V
Supply Voltage-Min (Vsup) 4.5V
Number of Ports2
Output Current48mA
Number of Bits 8
Clock Frequency 125MHz
Propagation Delay8 ns
Turn On Delay Time2 ns
Family AS
Logic Function D-Type, Flip-Flop
Current - Quiescent (Iq) 150mA
Output Characteristics 3-STATE
Current - Output High, Low 15mA 48mA
Max Propagation Delay @ V, Max CL 8ns @ 5V, 50pF
Trigger Type Positive Edge
Number of Input Lines 8
Clock Edge Trigger Type Positive Edge
Height Seated (Max) 2.65mm
Width 7.5mm
RoHS StatusROHS3 Compliant
In-Stock:4502 items

SN74AS4374BDWG4 Product Details

SN74AS4374BDWG4 Overview


The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is embedded in the Tube package. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at 0°C~70°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74ASseries of FPGAs. A frequency of 125MHzshould not be exceeded by its output. In total, there are 1 elements. It consumes 150mA of quiescent current without being affected by external factors. There have been 20 terminations. If you search by 74AS4374, you will find similar parts. It is powered from a supply voltage of 5V. In terms of electronic devices, this device belongs to the ASfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. There are 5V power supplies attached to it. The flip flop contains 2ports. The 48mA output current allows it to be designed with the greatest amount of flexibility. It is reported that there are 8 input lines. In addition, DUAL-RANK FLIP-FLOPis a characteristic of it.

SN74AS4374BDWG4 Features


Tube package
74AS series
20 pins
8 Bits
5V power supplies

SN74AS4374BDWG4 Applications


There are a lot of Texas Instruments SN74AS4374BDWG4 Flip Flops applications.

  • Cold spare funcion
  • Functionally equivalent to the MC10/100EL29
  • Divide a clock signal by 2 or 4
  • Dynamic threshold performance
  • Storage Registers
  • Asynchronous counter
  • Automotive
  • Registers
  • ESD performance
  • Guaranteed simultaneous switching noise level

Get Subscriber

Enter Your Email Address, Get the Latest News