SN74LV74ADRG4 Overview
The package is in the form of SOIC. As part of the package Tape & Reel (TR), it is embedded. The element count is 2 . 14terminations have occurred. It is powered by a voltage of 2.5V . A device of this type belongs to the family of LV/LV-A/LVX/H. It is mounted in the way of Surface Mount. There are 14pins on it. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part with 1bits has been designed. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. A power supply of 3.3Vis required to operate it. 1input lines are available for you to choose from. A high level output current of -12mAis set. In the low level output current setting, the current is set to 12mA. Ideally, the operating temperature should be below 125°C. If the operating temperature is higher than -40°C, the system should operate properly. In order for it to operate, a supply voltage of 2Vis required. A maximum voltage of 5.5V can be provided by it. This frequency can be achieved at 140MHz. There is a logic IC D FLIP-FLOP used in the D flip flop. It has 2 functions. 14pins are available on this JK flip flop. With an output current of 12mA, this flip flop offers maximum design flexibility.
SN74LV74ADRG4 Features
Tape & Reel (TR) package
14 pins
1 Bits
3.3V power supplies
2 Functions
14 pin count
SN74LV74ADRG4 Applications
There are a lot of Texas Instruments
SN74LV74ADRG4 Flip Flops applications.
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
