74VHCT574AMTCX Overview

As a result, it is packaged as TSSOP. There is an embedded version in the package Tape & Reel (TR). Currently, there are 20 terminations. A voltage of 5V is used to power it. This D flip flop belongs to the family of AHCT/VHCT. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 8bits in its design. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. This flip flop has a total of 2ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Currently, there are 1 lines of input. Quiescent current is consumed by the D latch in the amount of 4μA. It is also characterized by BROADSIDE VERSION OF 374. The high level output current is set to -8mA. The low level output current is set to 8mA. It is recommended that the operating temperature be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. It is powered by 4.5V as its minimum supply voltage. The maximum supply voltage supported by the flip flop is 5.5V. It is possible to obtain a frequency of 80MHz. The logic IC it uses is BUS DRIVER. Currently, it is equipped with 1 functions . A total of 8 channels are available.

74VHCT574AMTCX Features

Tape & Reel (TR) package
20 pins
8 Bits
5V power supplies
1 Functions

74VHCT574AMTCX Applications

There are a lot of ON Semiconductor 74VHCT574AMTCX Flip Flops applications.

• Common Clocks
• Latch-up performance
• Pattern generators
• Digital electronics systems
• Event Detectors
• Safety Clamp
• Instrumentation
• Memory
• Counters
• Parallel data storage