SN74LVC2G79YZPR Overview

It is packaged in the way of 8-XFBGA, DSBGA. The Cut Tape (CT)package contains it. T flip flop uses Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 1.65V~5.5V is required for operation. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. You should not exceed 160MHzin its output frequency. There is 5μA quiescent consumption. There have been 8 terminations. This D latch belongs to the family of 74LVC2G79. Power is provided by a 1.8V supply. Its input capacitance is 3.5pF farads. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. There are 8pins on it. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. To achieve this superior flexibility, 2 circuits are used. This D flip flop is well suited for TR based on its reliable performance. An electrical current of 3.3V volts is applied to it. It has 1 output lines to operate.

SN74LVC2G79YZPR Features

Cut Tape (CT) package
74LVC series
8 pins
3.3V power supplies

SN74LVC2G79YZPR Applications

There are a lot of Texas Instruments SN74LVC2G79YZPR Flip Flops applications.

• QML qualified product
• Convert a momentary switch to a toggle switch
• Bounce elimination switch
• Consumer
• Count Modes
• Buffered Clock
• Individual Asynchronous Resets
• EMI reduction circuitry
• Computers
• Storage registers