SN74LVC823APW Overview

It is packaged in the way of 24-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tube. As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 1.65V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. The 74LVCseries comprises this type of FPGA. You should not exceed 150MHzin its output frequency. D latch consists of 1 elements. During its operation, it consumes 10μA quiescent energy. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74LVC823, you will find similar parts. It is powered by a voltage of 1.8V . Input capacitance of this device is 5pF farads. This D flip flop belongs to the family of LVC/LCX/Z. Surface Mount mounts this electronic component. 24pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 9bits are used in this part. This D flip flop is equipped with 0 ports. With an output current of 24mA, this device offers maximum design flexibility. There are no output lines on the JK flip flop. A total of 9input lines have been provided. In addition, you can refer to the additinal WITH CLEAR AND CLOCK ENABLE of the D latch.

SN74LVC823APW Features

Tube package
74LVC series
24 pins
9 Bits

SN74LVC823APW Applications

There are a lot of Texas Instruments SN74LVC823APW Flip Flops applications.

• Differential Individual
• Circuit Design
• Dynamic threshold performance
• Shift Registers
• Convert a momentary switch to a toggle switch
• Matched Rise and Fall
• ESCC
• Registers
• Shift registers
• Synchronous counter