SN74LVT574PWR Overview

20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. It is contained within the Cut Tape (CT)package. Currently, the output is configured to use Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 2.7V~3.6V is required for operation. In this case, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74LVT series. Its output frequency should not exceed 150MHz. In total, there are 1 elements. During its operation, it consumes 190μA quiescent energy. A total of 20 terminations have been made. The 74LVT574family includes it. It is powered by a voltage of 3.3V . This T flip flop has a capacitance of 4pF farads at the input. It is a member of the LVTfamily of D flip flop. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 20. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. The flip flop is designed with 8bits. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2.7V. The superior flexibility is achieved through the use of 8 circuits. Due to its reliability, this T flip flop is well suited for TR. A total of 2ports are embedded in the D flip flop. High efficiency requires the supply voltage to be maintained at 3.3V. It has 3 output lines to operate.

SN74LVT574PWR Features

Cut Tape (CT) package
74LVT series
20 pins
8 Bits

SN74LVT574PWR Applications

There are a lot of Texas Instruments SN74LVT574PWR Flip Flops applications.

• 2 – Bit synchronous counter
• Matched Rise and Fall
• Circuit Design
• Computing
• Computers
• Individual Asynchronous Resets
• Count Modes
• Reduced system switching noise
• Counters
• Memory