SN74LVTH273DWRE4 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2.7V~3.6V. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. It belongs to the 74LVTHseries of FPGAs. Its output frequency should not exceed 150MHz. There are 1 elements in it. There is a consumption of 190μAof quiescent energy. A total of 20 terminations have been made. JK flip flop belongs to 74LVTH273 family. Power is provided by a 3.3V supply. This JK flip flop has a 4pFfarad input capacitance. In this case, the D flip flop belongs to the LVTfamily. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 20pins on it. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. There is a 3.6Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 2.7V. 8 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for TR. The supply voltage should be maintained at 3.3V for high efficiency. With an output current of 64mA, this device offers maximum design flexibility.
SN74LVTH273DWRE4 Features
Tape & Reel (TR) package
74LVTH series
20 pins
8 Bits
SN74LVTH273DWRE4 Applications
There are a lot of Texas Instruments SN74LVTH273DWRE4 Flip Flops applications.
- Latch-up performance
- Data Synchronizers
- Load Control
- ATE
- Circuit Design
- Clock pulse
- 2 – Bit synchronous counter
- Frequency Divider circuits
- ESD protection
- Storage registers
